Hydraulic Mulch & Additives
Select a Hydraulic Mulch & Additive product to learn more:
|
Hydro-Blanket BFM
Hydro-Blanket BFM provides the best protection on steep slopes at the lowest overall cost in a quick, safe, easy hydraulic application. It is less expensive and faster to install than blankets or sod and more effective than blankets, competitive BFMs and conventional hydraulic mulches. Extensive testing proves that Hydro-Blanket BFM controls erosion more completely than competitive BFMs on steep slopes subjected to heavy rains.
- Hydro-Blanket MSDS (pdf)
- Hydro-Blanket Standard Specifications (pdf)
- Hydro-Blanket Brochure (pdf)
- Hydro-Blanket ESP Loading Chart (pdf)
To order any of the products listed or obtain additional information please contact us.
[top]
Profile® Blend
Profile® Blend hydraulic mulch combines 100% Thermally Refined® wood fiber with a “best in class” cellulose fiber to deliver enhanced water-holding capacity, allowing for better germination, fewer washouts and reduced callbacks than other blend products.
- The blend of wood and cellulose is both easy to mix and spray, combining good yield and erosion control qualities
- Easy to use and load in equipment - goes into suspension at an accelerated rate, allowing for uniform ground coverage
- Absorbs water rapidly, forming a homogeneous slurry
- Maximum slope length of 15 feet (4.6 m)
- Functional longevity is ≤ 3 months
- Profile Blend SDS (pdf)
- Profile Blend CSI Spec (Word document)
- Profile Blend Data Sheet (pdf)
- Profile Blend Product Sheet (pdf)
To order any of the products listed or obtain additional information please contact us.
[top]
Profile® Blend with Tackifier
Combination of Thermally Refined® wood fiber and highest quality of cellulose mulch with a tackifier including high-viscosity colloidal polysaccharides.
- Added tackifier allows for additional moisture retention which enhances seed survival rates
- Reduced friction in the hose and increased slurry shooting distance
- Eliminates the extra step and mess of field-mixing tackifier
- Non-toxic, environmentally safe and biodegradable
- Maximum slope length of 20 feet (6.1 m)
- Functional longevity is ≤ 3 months
- Profile Blend with Tackifier SDS (pdf)
- Profile Blend with Tackifier CSI Spec (Word document)
- Profile Blend with Tackifier Data Sheet (pdf)
- Profile Blend with Tackifier Product Sheet (pdf)
To order any of the products listed or obtain additional information please contact us.
[top]
Profile® Cellulose
Profile® Cellulose hydraulic mulch is made with 100% grade-A recycled paper and is the cleanest, most consistent cellulose mulch available.
- High quality 100% cellulose fiber mixes in water at an accelerated rate and stays in suspension for more uniform consistency
- Exclusive defibration and production processes improve water-holding capacity
- Ideal cover for general seeding
- Maximum slope length of 15 feet (4.6 m)
- Functional longevity is ≤ 3 months
- Profile Cellulose SDS (pdf)
- Profile Cellulose CSI Spec (Word document)
- Profile Cellulose Data Sheet (pdf)
- Profile Cellulose Product Sheet (pdf)
To order any of the products listed or obtain additional information please contact us.
[top]
Profile® Wood
Contains 100% of the highest quality recycled wood fibers that have been Thermally Refined®.
- Delivers up to 50% more water-holding capacity and germination than atmospherically refined wood mulches
- Provides maximum soil coverage for greater value
- Delivers farther and smoother shooting for greater productivity
- Maximum slope length of 20 feet (6.1 m)
- Functional longevity is ≤ 3 months
- Profile Wood SDS (pdf)
- Profile Wood CSI Spec (Word document)
- Profile Wood Data Sheet (pdf)
- Profile Wood Product Sheet (pdf)
To order any of the products listed or obtain additional information please contact us.
[top]
Profile® Wood with Tackifier
100% recycled wood fibers and tackifier provide increased binding capabilities.
- Tackifier is a three-dimensional blend of polymers and polysaccharides which enhance the chemical bond within the mulch matrix for better erosion control
- Disperses quickly in water, which allows for better blending with seed and fertilizer
- Eliminates the extra step and mess of field-mixing tackifier
- Non-toxic, environmentally safe and biodegradable
- Maximum slope length of 30 feet (9.1 m)
- Functional longevity is ≤ 3 months
- Profile Wood with Tackifier SDS (pdf)
- Profile Wood with Tackifier CSI Spec (Word document)
- Profile Wood with Tackifier Data Sheet (pdf)
- Profile Wood with Tackifier Product Sheet (pdf)
To order any of the products listed or obtain additional information please contact us.
[top]
ProMatrix
ProMatrix with patented Engineered Fiber Matrix™ (EFM™) technology was created to give you an edge when bidding on jobs requiring BFM/SMM hydraulic products. ProMatrix delivers the erosion control and vegetative establishment you expect from Profile Products at a competitive price and with 20% fewer tank loads per job.
- ProMatrix EFM delivers superior performance and sustainable results, in an easy-to-apply, and cost effective solution:
- Highest-loading formulation with BFM performance; 60 pounds per 100 gallons of water
- Speeds application; proprietary Dispersion Granules facilitate even distribution of the fibers and chemistry to ensure smooth slurry pumping and shooting
- Class-leading erosion control effectiveness; meets or exceeds all industry testing standards for BFM/SMM products
- Lasting performance with a Functional Longevity of up to 12 months
- Quick germination and rapid vegetative establishment
- Environmentally safe; it’s non-toxic, contains 100% recycled wood fibers and is 100% biodegradable
- ProMatrix Brochure (pdf)
- ProMatrix SDS Sheet (pdf)
Packaging: 50 lb. bales, 40 bales per pallet.
To order any of the products listed or obtain additional information please contact us.
[top]
Tacking Agent III
PERFORMANCE PRODUCTS FOR HYDRO-SEEDING PROFESSIONALS
- MEETS OR EXCEEDS REQUIREMENTS FOR NON-ASPHALTIC TACKING EMULSIONS
- CONTAINS POLY-ACRYLAMIDE, CO-POLYMERS AND HYDRO-COLLOID POLYMERS
- UNIVERSITY TESTED AND PROVEN TO CONTROL EROSION WITHOUT CURING
Directions for Use:
Once your hydraulic seeder is approximately 1/3 full of water add tacking agent II, seed, fiber mulch & fertilizer to the slurry. Please refer to equipment manufacturer's loading instructions.
- Tacking Agent III Specs (pdf)
- Tacking Agent II MSDS Sheet (pdf)
Physical Properties:
pH Range: 7.0 +-1
Viscosity (saybolt): 197 cps +-20
Surface Tension: 63.9 Dynes / cm
Specific Gravity: .7281
Application Rate: Recommended rate of 32# per acre.
Packaging: 32# cases, 4/8# bags per care
To order any of the products listed or obtain additional information please contact us.
[top]